mtoolstest

mtoolstest命令用于测试并显示mtools的相关设置。mtoolstest为mtools工具指令，可读取与分析mtools的配置文件并在屏幕上显示结果。

语法

$ mtoolstest

实例

$ mtoolstest  # 显示mtools软件包当前的配置信息
# >>> drive J: #mtools软件包当前的配置信息列表
# >>> #fn=0 mode=0 builtin
# >>> file="/dev/sdb4" fat_bits=16
# >>> tracks=0 heads=0 sectors=0 hidden=0
# >>> offset=0x0
# >>> partition=0
# >>> mformat_only
# >>> drive Z:
# >>> #fn=0 mode=0 builtin
# >>> file="/dev/sdb4" fat_bits=16
# >>> tracks=0 heads=0 sectors=0 hidden=0
# >>> offset=0x0
# >>> partition=0
# >>> mformat_only
# >>> drive X:
# >>> #fn=0 mode=0 builtin
# >>> file="$DISPLAY" fat_bits=0
# >>> tracks=0 heads=0 sectors=0 hidden=0
# >>> offset=0x0
# >>> partition=0
# >>> drive A:
# >>> #fn=2 mode=128 defined in /etc/mtools.conf
# >>> file="/dev/fd0" fat_bits=0
# >>> tracks=0 heads=0 sectors=0 hidden=0
# >>> offset=0x0
# >>> partition=0
# >>> exclusive
# >>> drive B: 
# >>> #fn=2 mode=128 defined in /etc/mtools.conf
# >>> file="/dev/fd1" fat_bits=0
# >>> tracks=0 heads=0 sectors=0 hidden=0
# >>> offset=0x0
# >>> partition=0
# >>> exclusive
# >>> drive M:
# >>> #fn=2 mode=0 defined in /etc/mtools.conf
# >>> file="/var/lib/dosemu/hdimage.first" fat_bits=0
# >>> tracks=0 heads=0 sectors=0 hidden=0
# >>> offset=0x80 
# >>> partition=1
# >>> drive N:
# >>> #fn=2 mode=0 defined in /etc/mtools.conf
# >>> file="/var/lib/dosemu/fdimage" fat_bits=0
# >>> tracks=0 heads=0 sectors=0 hidden=0
# >>> offset=0x0
# >>> partition=0
# >>> mtools_fat_compatibility=0
# >>> mtools_skip_check=0
# >>> mtools_lower_case=0